Aquasorb

Aquasorb / Aquasorb-F is a 100% pure natural product made from natural zeolite for use in aquariums, ponds, and biotopes. The material consists of a solid natural stone with numerous pores, cavities, and channels.

Through its adsorptive effect, Aquasorb binds environmental toxins as well as decay products electrostatically inside the cavity system. At the same time, it promotes a positive bacterial culture, inhibits algae growth, and supports the stabilization of water quality.

Aquasorb acts as an ion exchanger and catalyst and specifically binds ammonium (NH4+), a decisive factor for clear water and reduced algae formation. Of the over 100 known natural zeolites, only a limited selection is suitable for use in aquariums and ponds – Aquasorb meets these requirements reliably.

Function

As a natural zeolite, Aquasorb performs several specific functions for the sustainable improvement of water quality in aquariums, ponds, and biotopes.
  • Reliably binds ammonium (NH4+) and reduces algae formation

  • Adsorbs environmental toxins and decay products from the water

  • Promotes a stable and positive bacterial culture

  • Acts as an ion exchanger and catalyst in the water system

  • Stabilizes water quality permanently and pH-neutrally

How Aquasorb Works

Aquasorb consists of natural zeolite in the form of a solid natural stone with numerous pores, cavities, and channels. This distinct cavity system ensures a very large active surface area where pollutants are electrostatically attracted and held.

Through its adsorptive effect, Aquasorb removes environmental toxins as well as decay products from the water. At the same time, it specifically binds ammonium (NH4+), a crucial nutrient for algae growth, thus reducing deposits and cloudiness.

Aquasorb thereby supports a biological balance in the aquarium and pond, promotes beneficial microorganisms, and ensures clear and stable water for months.

poröse struktur von zeolith mit ammoniumbindung nh4

10 Reasons for Aquasorb

Ensures permanently clear water

Aquasorb extracts polluting substances from the water and thus supports clear and stable water optics. Cloudiness and deposits are visibly reduced.

Versatile use as filter substrate

Aquasorb is ideally suited for filter systems in aquariums and ponds. The effect lasts for several months and renewal is only necessary when needed.

Absolutely insoluble in water

The material remains completely stable and does not dissolve in water. It does not release any mineral salts or other substances into the water.

pH-neutral and gentle

Aquasorb does not influence the pH value of the water. Thereby, it supports stable water quality in the long term.

Controlled and consistent quality

The quality of Aquasorb is continuously monitored through various quality controls. This guarantees a constant and reliable effect.

Free from pollutants and fibers

Aquasorb is absolutely pure and contains no fibers or harmful components. The product is also approved for animal nutrition.

Safe even at higher dosage

Even with an excessively high dosage, there are no negative effects on the water system. Aquasorb is therefore particularly user-friendly.

Adaptable through different grain sizes

Depending on the area of application, coarse and fine grain sizes are available. Thus, Aquasorb can be optimally adapted to different applications.

Environmentally friendly disposal

After use, Aquasorb can be composted or scattered directly into the soil. Costly disposal is not required.

Also suitable for saltwater

Aquasorb can be used not only in freshwater but also in saltwater. This makes the product versatile in use.

F.A.Q.

Aquasorb is effective over several months. Renewal is only necessary when the effect diminishes or the water pollution increases.

Yes, Aquasorb can be used directly or in a mesh bag in the aquarium, pond, or biotope. Before use, it should be briefly rinsed with cold water.

Yes, Aquasorb is suitable for use in both freshwater and saltwater. The material remains stable and pH-neutral.